Home › Forum › Ask A Member › help taking apart 10hp chris craft lower › Re: help taking apart 10hp chris craft lower
July 15, 2017 at 10:58 am
#61649
Before you do that, be sure to remove the retaining ring AND the impeller housing lock pin… The lock pin keeps the impeller housing from rotating while the motor is in operation. if you try to force the housing out without removing this little pin first (#269 in the diagram below), you end up breaking out the impeller housing.
Be careful, as Commander parts are hard to come by. http://www.chriscraftoutboards.com/commander_lower.html