Re: Possible to add electric start to ’58 Fastwin 18?

[Ron Devries]

quote Wet Willie:

Thanks A LOT for responding with that link. Having read the entire thread, your last post in it convinced me to trashcan my idea of converting to an electric start. I guess I will have to try pull starting it and see if I want to swap motors instead.
THANKS again!

You can also set it up to have all the electric start stuff built into the motor. It’s not factory but you would only need the bracket and starter motor ( assuming your motor has the teeth on the flywheel). A standard relay and switch. Power cables only that go to a battery. If you are rope starting, you are going back to the motor anyway, so you can pull the choke by hand.