Re: 1950 – 1953 Fleetwin Prop Shaft Seals

Home › Forum › Ask A Member › 1950 – 1953 Fleetwin Prop Shaft Seals › Re: 1950 – 1953 Fleetwin Prop Shaft Seals

July 10, 2017 at 6:54 pm #61369
RICHARD A. WHITE
Participant

    Lifetime Member
    quote Buccaneer:

    Richard, Good tip on taking measurements “cold”. Thanks.
    Frank, I’m guessing you have a four jaw chuck. I do not,
    but will look at the end cap and see if it’s possible to mount.
    Thanks

    3 jaw chuck will do it just fine, material needs to be bigger when you start is all..

    http://www.richardsoutboardtools.com
    classicomctools@gmail.com