Home › Forum › Ask A Member › 1950 – 1953 Fleetwin Prop Shaft Seals › Re: 1950 – 1953 Fleetwin Prop Shaft Seals
July 10, 2017 at 6:23 pm
#61366
quote Buccaneer:
Looking for a modern replacement for prop shaft seal 202686,
for the 1950 to 1953 Evinrude Fleetwins.
for the 1950 to 1953 Evinrude Fleetwins.
The prop shaft seal is an oddball size, of .594 or 19/32″ shaft size,
and the OD is .875, or 7/8″.
up the OD.
Anyone have any good prop data with bore sizes that
shows a bore to fit a prop shaft of .594 or 19/32″ ?
Thanks!
That is only 1/32 (about 31 thou) larger than 9/16, a common size. I think that is a difference many seals would be able to handle. Going the other way, you are 1/32 from 5/8, another common size. A good 5/8" seal, one with a gaiter spring, might hold in a 19/32nd shaft. If it was me I’d probably order one of each and see how they fit…..