Re: 1950 – 1953 Fleetwin Prop Shaft Seals

Home › Forum › Ask A Member › 1950 – 1953 Fleetwin Prop Shaft Seals › Re: 1950 – 1953 Fleetwin Prop Shaft Seals

July 9, 2017 at 9:15 pm #61309
Buccaneer
Participant

    US Member

    Thanks Garry, It appears that no latter models used
    a prop shaft .594 in diameter at the seal.
    Only seal I see with the correct OD of .875 is
    for a 1/2" shaft. Even if one turned down the
    Fleetwins prop shaft .094 to make the seal fit,
    then the prop bushing is going to be a tad sloppy 😮

    Prepare to be boarded!