Home › Forum › Ask A Member › 4447 Evinrude Fleetwin › Re: 4447 Evinrude Fleetwin

#60810
Buccaneer
Participant

    US Member

    Goman, it’s quite obvious from your photo on how the
    clutch arm sits in the support collar. Not sure why
    I couldn’t see that out in the garage. Hope mine
    isn’t broken!
    It looks like I can use a piece of hardened wire
    to make a new "spring" or clip.

    Garry, my clutch spring is somewhat "pitted up",
    but it does turn freely on the drum when turned
    backwards. What an awlful place to put the
    neutral clutch in a vintage gear case that
    was guaranteed to leak after ten years!
    Will see if the other gear case has better
    parts, but not anticipating as such!
    Thanks!

    Prepare to be boarded!