Home › Forum › Ask A Member › Sealer for cylinder head and crankcase gasket › Re: Sealer for cylinder head and crankcase gasket
June 29, 2017 at 12:50 am
#60571
That’s the powerhead base gasket. I typically install those dry. A sealer can be used, but I have found it isn’t necessary in my experience and it makes clean up next time a little more difficult. If I have one I think I may remove a few times, I have put a light film of grease on both sides so it releases. I haven’t had much of an issue with leakage with them. I’m sure others will offer their experiences and methods as well.
-Ben
OldJohnnyRude on YouTube