Re: OMC Transom Screw Plate Retainers removal

Home › Forum › Ask A Member › OMC Transom Screw Plate Retainers removal › Re: OMC Transom Screw Plate Retainers removal

June 28, 2017 at 4:32 pm #60537
Mumbles
Participant

    If I don’t have any of the stepped screws from a later OMC donor motor, I make them with a small sleeve on a 12-24 machine screw to mimic the originals. A drop of Loc Tite on the threads helps to hold them in place.

    Attachments: