Home › Forum › Ask A Member › Transom thickness for Big Twins › Re: Transom thickness for Big Twins
May 25, 2015 at 10:37 pm
#16863
Olcah,
I just did the transom on my 14′ MirroCraft using 2 layers of 3/4" quality plywood. I epoxied the two layers together, then coated all over with epoxy, then Spar urethane over that. I capped it with a piece of Stainless that comes down 4 inches on the inside and 1 inch on the outside. Total thickness is about 1 & 3/4". My 25hp RD Likes it! So do I.
I would think White Oak would be great at 1.75 to 2.00"