Re: 1969 25hp Evinrude Low Speed carb and flywheel torque

Home › Forum › Ask A Member › 1969 25hp Evinrude Low Speed carb and flywheel torque › Re: 1969 25hp Evinrude Low Speed carb and flywheel torque

June 22, 2017 at 4:11 pm #60132
amuller
Participant

    The torque spec is 40-45 ft lbs. I’ve been working on one of these. (Need a hood for a 69).

    These motors are highly stressed at 25 hp. If there is any question about the fit of the flywheel to the crank I would lap.

    There is an OMC manual for these here: http://boatinfo.no/lib/evinrude/manuals … .html#/588