Re: 9.5hp Johnson/Evinrude characteristics

Home › Forum › Ask A Member › 9.5hp Johnson/Evinrude characteristics › Re: 9.5hp Johnson/Evinrude characteristics

June 21, 2017 at 1:39 pm #60067
melugin
Participant

    US MEMBER PAY BY CHECK

    Another reason I don’t want to work on the 9.5. To replace the fuel line to the fuel pump, it is a close fit at the fuel connector. The tiller handle has to come off to remove the gas tank connector. Fuel line CAN be attached and fastened without removing the connector, but it is a very trying experience. I will only work on one friend’s motor of this type and I hope I won’t have to do that job again.
    Am I wrong, is there an easier way to do this?