Home › Forum › Ask A Member › Need Help K45 ignition › Re: Need Help K45 ignition
June 16, 2017 at 5:08 pm
#59784
at least for testing might try new condensers. I have had good luck with some sold for 60’s Chevy just had to make small plates to cover
the rectangular opening on the bottom of the mag plate. Might also replace the plug wires. Cut them off about an inch from the coil and solder and shrink wrap or liquid tape them. That keeps the heat away from the coil. Most of the time the coils are ok just condensers shot. I have done my A50 and K50 this way and both run good.
Doug
Doug
how is it motors multiply when the garage lights get
turned off?