Re: I hate 4 Strokes

[joesnuffy]

I am guessing the timing keys won’t be sheered but verify the timing using the correct manual. Looking at the manual posted if its correct page 119. If timing verifies keys aren’t sheered and timing belt isn’t off by a 1 or 2 teeth. I also wanted to make sure you have about the same compression on both cylinders by verifying it with a compression gauge after you put flywheel back on to make sure of no internal damage just to rule that out or rule it in. I thought cam timing would be a good thing to check while you got the flywheel off waiting for a key. Also you may want to change the oil I was reading in manual posted that low oil pressure trips the computer/brain and won’t let engine run over 2000 rpms. If oil is diluted with fuel like mumbles said it could cause low oil pressure.

Hope that helps,
Joe

https://SecreLocal.com - - No Verify - Anonymous Adult Dating -