Re: Evinrude 3 hp Lightwin 3012 diagnosis

[Buccaneer]

Wedgie, I soaked the carb overnight in OMC tuner. It
seems to work pretty good. I’d be more inclined to
try the torch and penetrating oil on the high speed
nozzle again (and may yet) if I find out it has
affect on the low speed circuit.
Seems like in the good old days there were diagrams
that shows the fuel flow / circuits. I try to figure
them out myself, to see how they work, but I think I’d need an x-ray machine
for this one!
The old carb gasket is the rubber type and seems okay.
The one in the carb kit is a fiber gasket, which I suppose
would work okay too.
I used a ultrasonic cleaner at work years ago to clean my
watch band….. worked great and the band was tighter
after from getting all the crud out.
Thanks

Prepare to be boarded!