Re: KF5 lower unit lube

[bill-m]

Thanks for the info fellas. When I went through this motor it had a home made brass screen filter in it. I tried to find an original filter to no avail. However, I did locate a used filter and cleaned it up. The AJ-30 carb leaks even after rebuilding so I figured it was getting plenty of gas. I may install an inline filter as this is a daily driver and not a show piece.
I also replaced all coils, points and condensers. I was very careful not to move the mag plate but I guess that doesn’t mean that nothing move. I don’t have one of those degree wheels and am not sure how to use one any way so I will check the repair manual and see if there is something I can do without it.
I really love this little KF5 motor. It is light weight and I do not travel to the lake with it on the boat. I got it for free but put enough into it that could have bought a new 3.5 motor. But what’s the fun in a new motor?
I will bring those other two motors home in a few weeks and evaluate them. They will be good projects for the next few winters. My boat is rated for 12 hp or less so both motors will work fine. The only concern is weight. The Evinrude doesn’t look so bad but that Johnson looks to be pretty heavy. Thanks again for the info!