Re: OMC Rubber shock mount replacement?

[ADAM GIBB]

Frank,
I got it apart as you described. The front center mount and one side mount had failed, so it came apart easy. What is the proper sequence for reassembly? The front center mount is giving me a hard time. If I install it on the exhaust housing, I cant get it through the hole on the swivel bracket. If I install it on the swivel bracket, I can drop the exhaust housing down onto it because it is slotted, by the area is not accessible to tighten the nut. As I said in my earlier post. I am used to doing the early RDs with the carb and front half of the lower pan removed.

Adam