I have two Stinger/Hustlers. One is a long shaft 1975 Stinger on a Hydrostream Vixen. I am messing with jacking it up and will add a nosecone. It has the large gear case w/3 water pickup holes. The other is a 75 Evinrude short shaft and has the small bullet w/4 water pick up holes. The large gearcase gear ratio is 12:29 and I am using a 22" pitch prop. The small gear case ratio is 15:28 and I am using a 17" prop and get 52 mph @ 6000 rpm. The G3 also has a steering bar and tilt and trim. These motors are still raced and the tilt/trim is a unit used by the racers.
1Aquaholic check your private messages.
Don