Re: AD-12 overheating – new impeller too!!

Home › Forum › Ask A Member › AD-12 overheating – new impeller too!! › Re: AD-12 overheating – new impeller too!!

May 11, 2017 at 12:52 am #57480
63lstrition
Participant

    I don’t have any specific temperature readings. It was getting to hot to touch on the exhaust side and the cylinder head was getting hot. I was splashing water to see if it would cook off because it was getting too hot. Already pulled the powerhead to change the impeller originally. I will probably pull it again and check the impeller, blow out the cooling lines with compressed air, and cross my fingers.