Home › Forum › Ask A Member › AD-12 overheating – new impeller too!! › Re: AD-12 overheating – new impeller too!!
May 10, 2017 at 7:21 pm
#57445
That motor might (probably) have a restrictor in the water tube. It might have a chunk of crud in it. Also, the slanted hole in the water pump housing, between the water tube grommet cavity and the cup around the drive shaft might be plugged up. The purpose of the hole is to keep the cup filled water, which acts as a seal around the drive shaft hole. That will cause erratic pumping if plugged
And of course you are running it in a tub, which may be ok (??)