Re: 3 hp viking float adj.

[russ]

I removed float from bowl and found out bottom clip missing.Replaced clip on groove and checked top clip to make sure it was in place.I also took out low speed vale on front checked it out all seems to be ok with it. Put carb on fired up motor and with small adjs it ran good. Shut it off and it would fire up ok. So I shut fuel valve off at tank until tomorrow. Had to go back out an hour later and found fuel leaking from front of carb and top of float bowl where valve comes through. Should float bowl be run dry when done with motor? Do not know what else to try to stop fuel leaking. Thank you all for the input. Russ…