Re: KF9 impeller replacement update

Home › Forum › Ask A Member › KF9 impeller replacement update › Re: KF9 impeller replacement update

April 22, 2017 at 5:00 pm #56534
bsplit
Participant

    I made a tool like JW’s, but the cover had elongated holes from when someone in the past used a punch to remove it. I tried several times with a punch and a heavy hammer before being successful…..I thought I was going to ruin the cover….it’s a good thing that it is thick.

    I started the motor this morning, and it now pumps plenty of water.

    The impeller I removed had 12 vanes. The replacement has eight.

    Jim