Re: Lower Unit Gear Lube Rule of Thumb?

[Buccaneer]

Guess I’m not out much trying the oil…… if it leaks out, then grease it is!
The L.U. has all new needle bearings, new prop seal, and I shortened
the drive shaft bushing 1/8" so I could install a seal there as well.
And thanks to your advice before Jeff, I installed a new o-ring on the
shift rod, as well as put a new piece of tubing on the shift rod guide tube.
I hope the thing shifts when it’s running, as it seems impossible while not…..
but I didn’t try too hard so as not to break!
Regarding the Lubriplate 105 grease….. mine is in a tube……. insert
and squeeze….. I guess.

Prepare to be boarded!