I wanted to post my progress on my carburator work. I was able to remove the carb. On the carb there is a section which has the mixture up or down adjustment. Does this need to be opened and cleaned? My fear is that I am going to take something apart that will mess something up. Also, the mixture adjustmen knob on the front of the engine (big yellow knob) I for some reason could not come out of the carb. I could unscrew the brass nut but it would not pull out. Is that normal? The main gasket looked good enough. Should I just get carb cleaner and spray all the openings? Then blow it all out with compressed air? The float looked in good condition. I did notice some crud in the carb bowl. I am going to try and post some photos. Any other recommendations on what to open up and clean? Thanks.
Attachments:
