Re: 1948 Neptune Mighty Mite A1 starting issue help requested

Home › Forum › Ask A Member › 1948 Neptune Mighty Mite A1 starting issue help requested › Re: 1948 Neptune Mighty Mite A1 starting issue help requested

April 3, 2017 at 2:22 am #55415
huntleybill
Participant

    Hey John…not yet. I will be painting it this week hopefully. It may take me a couple of weeks to get it completely finished. Don’t worry, when I get it done, I will post the pictures and make sure EVERYONE sees the brass!!

    Fisherman6: The good news is there are a lot of choices for good 3D printers. The bad news is there are a lot of choices for good 3D printers! The first one I bought was a Makerfarm 8 inch Prusa I3V. http://www.makerfarm.com. The support after the sale is incredibly good. The machine is a kit and you put it together with very good step by step instructions.

    Then I wanted to get something with better quality and with Dual extruders. So, I did a lot of homework (as I would strongly suggest you do) and settled on the "Flashforge Creator Pro 2016" I chose it because of the good reviews it has and the fact that it is a very popular brand. Both machines are well under $1000.

    Hope this helps.
    Bill