Home › Forum › Ask A Member › Goodyear See Bee 025-3564 › Re: Goodyear See Bee 025-3564
Ok thanks. Just a couple more questions since you have been so helpful. I want to replace the gear oil in the lower unit. I would suppose just standard 90 weight marine oil would work? I am used to having a Upper fill hole and a lower drain hole. based on the diagram, I see the gear lube plug. Is that the fill hole? I am used to pumping the gear lube into the lower hole until it starts coming out of the upper hole and then closing the upper hold and at last closing the lower hole. Is it the same for this lower unit? if so, what two holes should I be looking at? Also, I have no extra sheer pins. Are you or anyone aware of where I could buy some extras? FYI, I took the engine cover off and it looks like I should be able to remove the gas tank and clean that strainer and the one in the carburator. What a neat little engine. Thanks for all your help. Your advice has served me well!! Rob