Re: 1941 johnson model TD 15

[Buccaneer]

You can solder new wires on. Just buy a few feet of wire
and cut them an inch or or two longer than the old.
Places like this sell wire by the foot, or a good auto parts store.
https://brillman.com/product/b9921-001- … -the-foot/
You just have to be careful not to over heat the coil terminal, or
you’ll ruin the coil. The secondary winding attached to the terminal
is thin as hair.
The secret is a good hot soldering iron that will solder "fast",
and of course flux and electrical solder.

Prepare to be boarded!