Home › Forum › Ask A Member › Ruddertwin Jugs › Re: Ruddertwin Jugs
March 20, 2017 at 10:06 am
#54586
Boring them out will be interesting as I would suspect the plating will want to flake off instead of machining out nice and pretty like…
The other concern is honing the bores out as the same may occur.
As I suggested previously having them stripped of all plating then re-plating, just the outside this time, might be the best option.
I would be highly concerned about that plating flaking off while the piston is doing its thing….
http://www.richardsoutboardtools.com
classicomctools@gmail.com