Re: Need Help With a Sears 12′ Row Boat Repair.

Home › Forum › Ask A Member › Need Help With a Sears 12′ Row Boat Repair. › Re: Need Help With a Sears 12′ Row Boat Repair.

March 16, 2017 at 6:31 pm #54417
paulfromyork
Participant

    Tubs, yours is just like mine, a Sea Nymph clone from sears. This is really hard to measure because the taper from in to out is long. i would guess the angle at 30 degrees. And the depth is between 1/8" and 3/16". It seems to vary. You could make up panels that would fit into the depression in several thicknesses and glue up what you need at the site. Good luck. I would not do this remotely, but I am fussy about fits and finishes. Tool and die maker.