Home › Forum › Ask A Member › 1954 Evinrude Super Fastwin 15 › Re: 1954 Evinrude Super Fastwin 15
Well I think I’ve solved part of my problem. I noticed that at the start position the cam wasn’t even making contact with the roller. Adjusted it to where the cam was contacting the roller at the timing mark and it will at least start up in neutral now (though not with the throttle at the start position, still have to crank it as far as it will go in neutral to get it to start) but still doesn’t want to idle well. I know I did the carb right. I even soaked in parts cleaner and blew all the passages out with compressed air. Changed the o rings in the connectors. No tank leak. I guess I’m just going to have to find a sweet spot in that low idle knob because I can’t think of anything else it could be. It runs like a champ in gear at wot and down close to idle position.