Re: Johnson AD needs help

Home › Forum › Ask A Member › Johnson AD needs help › Re: Johnson AD needs help

March 3, 2017 at 1:58 am #53740
ADAM GIBB
Participant

    Canada Member

    Fleetwin,
    Good advice on removing the exhaust cover screws first….I always like to get past the tough points before ordering up a buch of parts.

    The block looks good. I would rather build it up with good parts and know what I have. I have pulled apart this engine and 3 parts motors. All have damage to the upper rod journal. I would not have guessed that they pump water up there, but I guess that is the new think that I leafed for yesterday. 😀

    I am on the hunt for a good crank. Have rings on hand and will hone it and make sure the bores are withing the acceptable range.