Re: Onto a new learning curve…CD ignition

Home › Forum › Ask A Member › Onto a new learning curve…CD ignition › Re: Onto a new learning curve…CD ignition

May 17, 2015 at 11:39 am #16198
debe
Participant

    Here in Australia a magazine Silicon Chip published a CDI Module in May 2008 issue. It was sold as a kit by Jaycar Electronics for $20. Ive built several & used them on stationary engines that had failed CDI units. If you have 3 cylinders you need 3 of these units one for each cylinder. There is a circuit in photo bucket debe5.