Re: Opposed twin coil swap

[RICHARD A. WHITE]

quote Stanley:

Thanks Tubs.I have seen that one and it was a help.I am probably a little slow witted and overly cautious,but I still don’t get the cutting part.Here is a picture of my laminations trimmed to the right width.My plan is to cut every other lamination at either of the marked spots.(I know I won’t need all the laminations.)When I cut and re-assemble them there will be a gap at the cut.Is that an issue?

Stanley, if those marks fall in a location that will be INSIDE either coil, roll with it as that is how it should be…

http://www.richardsoutboardtools.com
classicomctools@gmail.com