Home › Forum › Ask A Member › Tape on Fresh Paint – How long to wait? › Re: Tape on Fresh Paint – How long to wait?
I’d recommend starting with 1/8" Fine Line as it will go around corners easier than the 1/4" stuff will. The quarter can be use next to bring the edge out further for the masking tape to bond to. I’d also go with an automotive paint type masking tape instead of the blue or green household masking tape. 3-M makes a quality product. It seals better on the edges and will lift easily without taking the underlying paint with it. Big Box Store tape is better suited for window casings and trim inside your house where bleeding on the edges isn’t so noticeable. You will also want to burnish the edge of the fine line to make sure it is down tight so buy it in translucent instead of a solid color so you can see it bonding. Large areas can be masked using a roll of plastic film or paper with the masking tape already on it. A sharp razor knife and a pair of tweezers will also help to make the corners crisp. Have fun!
If you use automotive base/clear such as DuPont Nason line, everything can be done in a few hours on a warm day. Masking can be applied shortly after the base color flashes and can be removed just as quickly after the second color has gone off. It takes me about an hour to mask a two color hood. The clear can then be applied, allowing proper flash time between coats.