Re: Seagull carb removal…

[burt]

Thanks. That’s a good link but doesn’t show any carb stuff. Got the carb body off the crankcase and the thumb throttle assembly off the tiller. Separated the float bowl from the throttle body piece, but can’t figure out how to get the cable end and spring off the throttle body…the top screws on and off but the spring and cable are trapped down inside. I think the cable is okay…it will slide with the thumb throttle assembly disconnected from the other end of the cable. How do you disengage the cable and spring from down inside the throttle body…looks like that is necessary to get to the jets and throttle butterfly?…if there is one, can’t really tell from the limited vantage point of looking down inside around the cable and spring. It’s an Amal carb if that makes any difference…I think there is also a Villers? on other models.