Re: Changing the shift rod seal on my Johnson CD-12

Home › Forum › Ask A Member › Changing the shift rod seal on my Johnson CD-12 › Re: Changing the shift rod seal on my Johnson CD-12

February 18, 2017 at 3:49 am #53196
fisherman6
Participant

    US Member

    I have used my home built pressure tester with a bicycle pump too. It’s just a bit more convenient to use regulated compressed air in my shop because it’s there. Before I built the pressure tester, I’d just replace the seals, run it, and look for water in the oil after running it a while. I think you’re on the right track. If you do a lot of them, it’s worth getting a tester, though.
    -Ben

    OldJohnnyRude on YouTube