Re: 1922 Evinrude A Tiller

[slim60]

Thanks Tubs; I can’t take photos today so I’ll just try to explain. My lower looks like a ’22. There is a P1B on the pump bracket. Model and serial numbers were cut off the tag on the fuel tank. The flywheel has patent numbers for the mag of 1915, 1916. On your tiller photo the tube at top has a slot in it and two holes with bolts. Mine does not. The rod below that with the spring and pin, mine looks like it’s broke and it is rivited to the tube. One more thing. I have an open circuit between the points until I close them. When I connected the condenser wire I got a closed circuit. I spun the flywheel with the spark plug grounded and got a good blue spark. I also got shocked from the bolt in the start knob. Compression is very good. I have to hold on to the fuel tank and wear gloves to spin it through.