Home › Forum › Ask A Member › Cylinder head shocking me 1957 35hp evinrude › Re: Cylinder head shocking me 1957 35hp evinrude
February 15, 2017 at 9:13 pm
#53069
Well, at least everything didn’t get torn up under there….Check all the other fasteners while you are in there, and make sure you have all the leads routed correctly. The coil primary leads must be routed correctly, or they will rub on the point cam. The coil and condenser leads must be fastened to the points correctly, facing off to the side, or the flywheel will rub on them….