Re: Changing the shift rod seal on my Johnson CD-12

Home › Forum › Ask A Member › Changing the shift rod seal on my Johnson CD-12 › Re: Changing the shift rod seal on my Johnson CD-12

February 13, 2017 at 8:32 pm #52955
steeleman
Participant

    This topic inspired me to do the first lower unit reseal I have ever done.

    It was on a QD-24 and I just went ahead and used the tap method. There is no way a mushroomed bolt would have worked. It was super easy to tap and put a bolt halfway through and tap with a long punch from the other side.

    I reused the bushing as I only tapped half way through. Hopefully that is the correct thing to do:/ but I didn’t have another bushing