Re: Need help diagnosing Evinrude 9.5 problem

[titantn]

Wow. Thanks for all of the feedback. You guys are good. I’ll try to answer everything to help you help me.

It has been run in a barrel and on the lake. It runs the same in both locations. As I said, the stutter is extremely quick and at both slow and fast speeds. All of the items I mentioned in the first post have been replaced, but not the condensers, coil packs, or fuel pump. I really feel like the stutter is something electrical because it’s so quick, so I tend to rule out the fuel pump.

The coil packs visibly look good- no cracks that I can see, and I’m getting spark on both cylinders. I’m not sure if there’s a more definitive test you can do other than a visual check.

I am running the J6C plugs but I could get some new ones and try that again. All of the work was done by me, but I’ve taken it to 2 mechanics since then and they can’t/won’t figure it out. I’m very confident in the few things I’ve done including setting the timing of the points because I actually bought the tool from Frank – http://www.franksoutboardtools.com/timing-fixtures.html

Let me know what you think.