Re: Replacing the Rubber mounts on exaust tube 1957 Evinrude 35hp

Home › Forum › Ask A Member › Replacing the Rubber mounts on exaust tube 1957 Evinrude 35hp › Re: Replacing the Rubber mounts on exaust tube 1957 Evinrude 35hp

February 8, 2017 at 6:46 pm #52654
mr-asa
Participant

    That has a bolt through to the inside of the tower. You have to drop the lower unit. To do that remove those two flathead screws above the mount, unbolt one of the two bolts you can see inside, then remove all the bolts on the lower unit that connect it to the tower. From there you should be able to drop the lower unit and look inside the tower and see it.