Re: RDE-18 powerhead to exhaust plate/gaskets

Home › Forum › Ask A Member › RDE-18 powerhead to exhaust plate/gaskets › Re: RDE-18 powerhead to exhaust plate/gaskets

February 5, 2017 at 1:27 pm #52426
ADAM GIBB
Participant

    Canada Member

    It seems to me that the additional baffle was an attempt to keep water away from the lip seal. I believe that OMC found that it was better to abondon the baffle and switch back to the carbon seal. Somewhere I have read a series of bulletins to that effect.