Home › Forum › Ask A Member › Motor stand preservation tips requested › Re: Motor stand preservation tips requested
January 22, 2017 at 10:23 pm
#51519
Go to a cabinet shop and buy a scrap piece of good grade 3/4"plywood (lumber core is best,not as likely to warp) get it a few inches bigger than stand all around.Stain and finish.Take a soft brush and clean as much loose stuff off the stand as you dare.Go ahead and spray the stand with fast drying clear acrylic.Very light coat to start.Make up some brackets to fasten stand to base and stabilize it.Rug will be safe and stand as stable as you can make it.