Re: Best Way to Unseize an Engine

[Anonymous]

Ahh yes…… As they say, " Kroil it don’t spoil it" good old Kano Laboratories. Definitely one of my favorites! I have used just about all of their products over the years, I could not agree with you more reivertom. After I do a rough clean of the bore with good old gasoline to remove any loose particals I use one of their products called ExRust. It works pretty quick
In short time you start to see rust breaking down into that what I call butter scotch color as the rust breaks down. Next I use Penephite Graphited Penetrating Oil also a Kroil product,
This is what I use with regulated air pressure to wick down around the piston plus a little heat. Yes it cost money, but in most cases I can free up a powerhead in short order. Other members have had great luck with a product called Gibbs Penetrating Oil. Everyone has their favorite mystery juice, any petroleum based solvent with a little heat usually does the trick. Yeah it can be a smokey mess , but I don’t think there are too many of us that have not spent a Saturday or Sunday afternoon in a smoke cloud trying to free something up.

Respectfully
Brook N.