Home › Forum › Ask A Member › OMC 9.5 Prop Seal Question › Re: OMC 9.5 Prop Seal Question
The one on the left obviously is trashed by some sort of debris behind the prop. It need a replacement head and bearing assy (the part on the right). Various years / versions are interchangeable.
OK, having said that, the one on the right at one time had a weed & fish line excluder pressed into the outer end. It has fallen off, as most do. At the time they were producing that version, they did not list a replacement seal. They expected you to replace the whole head & bearing assy. However, that is not necessary, as the seal can be replaced. If you look at a parts list for different years where the excluder was not used, you can get the seal number. Or, if it is still readable on the one on the right, that would be the part number, but it is replaced by a different number.