Re: Anything Special about ’57 Lark Magneto Cam pin?

Home › Forum › Ask A Member › Anything Special about ’57 Lark Magneto Cam pin? › Re: Anything Special about ’57 Lark Magneto Cam pin?

January 13, 2017 at 9:15 pm #50978
David Stanton
Participant

    US MEMBER PAY BY CHECK

    I’d break off a drill bit. Clamp it tn a vice and hit it with a hammer, making it a bit too long and then grind the end down flat and to the right size. If you have expensive, high quality, drill bits; go buy a cheapie or a cheapie set.
    Dave