Re: Johnson AD-12 mystery

Home › Forum › Ask A Member › Johnson AD-12 mystery › Re: Johnson AD-12 mystery

January 10, 2017 at 4:15 pm #50780
JACQUES
Participant

    crooked flywheel notwithstanding ….

    anyway a spacer washer under or over the cam lobe would help lift the flywheel enough to clear the mag plate….?

    i know it is not design intent but…. if it solves the problem without affecting the rub blocks on the point arms…

    all that seems needed here is 1/16 or 3/32 spacing to clear the mag plate if no cure is found for this mysterious problem

    Joining AOMCI has priviledges 🙂