Re: BEST HOT GLUE FOR DENT PULLING?

Home › Forum › Ask A Member › BEST HOT GLUE FOR DENT PULLING? › Re: BEST HOT GLUE FOR DENT PULLING?

January 8, 2017 at 10:12 pm #50678
Tubs
Participant
    quote ratrodz:

    Are all hot glues alike? If not, what is the best for pulling on aluminum and brass? I have cleaned with alcohol and sanded with 320 grit to get a bite… nothing seems to work. Any advice here?Bob
    quote Chris_P:

    I weld Capacitor Discharge pins on to the metal. I then use a puller that attaches to said pin, and pops the dents out. That puts quite a bit of stress on the connection! NO way could glue hold here. Ive popped welds doing it. Probably bad welds, but welds none the less.


    On an Aluminum Tank ? You have stated this
    before. If you have discovered how to do this
    please share your procedure. Photos would
    also be of a lot of interest.

    A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.