Triton,
I have some pics of my AD11. Same motor, different year. In one pic you can see how the flywheel sets on the crank and its relative position to the magneto plate.
In the other pics my pencil points to the groove in the magneto plate and the corresponding edge of the flywheel that sits in this recess. It should not sit so low that it touches anywhere around the circumference as it turns.
I also have pics showing where the heel of the coil laminations rubbed on the magnet in the flywheel.
Hope these help rather than confuse. Hopefully you can use them to tell us where yours is rubbing.
Attachments:
