Re: 1924 ELTO Ruddertwin Model C Photo

[WAYNE]

quote Brook N.:

Hi Tubs,
Based on the initial photo he posted it looks to be from a Model G or J having 2 mounting holes with pullies.
I believe the Model C should have 4 mounting holes without pullies.

Based on the ones I have in my collection.

Respectfully

I think Tub’s is asking about the small mounting bracket that connects the yoke to the midsection as seen in the photos above. My Model C came with a four hole mounting bracket, which is 1/2" higher than the four hole bracket on Tub’s Model C. You can see the difference between them in the photos he posted. The two hole bracket in the photo I posted came with the replacement steering yoke and is not original to my motor.

On a side note, I wonder if I have the wrong prop. I notice that the prop will contact the rudder if its turned too far. Is this normal? The prop nut and prop look correct to me.

Wayne
Upper Canada Chapter

uccaomci.com