Re: 1924 ELTO Ruddertwin Model C Photo

Home › Forum › Ask A Member › 1924 ELTO Ruddertwin Model C Photo › Re: 1924 ELTO Ruddertwin Model C Photo

January 2, 2017 at 11:17 pm #50185
Anonymous

    Hi Guys,
    Happy New Year.

    Wbeaton the tiller yoke you have with the pullies and the mounting bracket with the two holes would be for the model G & J measures 7".

    Model A’s & earlier ( solid rudder ) no pullies mounting bracket 4 holes measures around 3"

    Model C no pullies mounting bracket 4 holes measures around 7".

    Model D no pullies mounting bracket 4 holes measures 10".

    Model G & J has pullies mounting bracket 2 holes measures around 7".

    Model K has pullies mounting bracket 2 holes measures around 10".

    There was also a hollow rudder conversion kit that was offered to switch your solid rudder motor over to a hollow rudder cooling system.
    That has no pullies mounting bracket 4 holes measures around 5".

    Measurements were taken from the Ruddertwins I have in my collection.

    Respectfully